home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Cream of the Crop 3
/
Cream of the Crop 3.iso
/
sound
/
mctn003p.zip
/
MCTN003P.TXT
< prev
Wrap
Text File
|
1994-03-10
|
3KB
|
77 lines
Multicom Technical Note MPC
--------------------------------------------
This document provides a guide to setting
up MIDI Mapper in Windows so that music and
sound are correctly produced in a Multicom
title.
Problem: Music or Sound does not play
-------
Solution: Create a New Setup for MIDI Mapper
--------
Procedure:
---------
1. Locate the MIDI Mapper contrfol panel. It is located in the Control
Panel program item of your Windows Main Group.
2. Note the setting that is currently being used (write down the name
that appears in the "Name" field of the MIDI Mapper control panel).
You will want toknow what the original setup was in case sound does
not play correctly in other programs. It may be necessary to change
the setup depending on the program being used.
3. Create a new setup by selecting the "New" button located at the
bottom of the MIDI Mapper window.
4. Enter the name of the new group. For easy reference the name of the
title (i.e. CookBook or Multicim) can be used. It is not necessary
to enter in a description.
5. Press "OK". You will be presented with a spreadsheet like Window.
6. The only area of this wibndow that we are concerned with is the
"Port Name" column. All other areas should remain untouched.
7. Select the first box directly under the "Port Name" column heading.
Click on the arroe that appears on the right of the box. A drop
down menu with sevceral optrions should appear. These options will
vary depending on the sound card installed in your computer. For
Sound Blaster - 16 there should be options for [Voyetra Super SAPI
FM Drive], [SB-16 MIDI Out] and [none].
In order for the sound to play correctly on a SoundBlaster Card,
channels 1 through 12 must have SB MIDI out selected for the "Port-
Name". Channels 13 through 16 should have the Voetra FM setting.
*Note: Other sound cards may only have the option for a MIDI
Synthesizer. For these cards set all the channels to use the MIDI
option that is present.
8. After setting up the new group, press "OK" and save the settings.
9. Close the MIDI Mapper Control Panel. You are now ready to run the
Multicom title.
*Note: It is not necessary to Exit Windows or re-boot your computer
for the changes to take effect.
10. When running the Multicom title and error message may appear stating
that `sound may not play correctly using the current MIDI setup.'
Ignore the message and see if music plays. In the CookBook title
music plays during the instruction of the program. In Nationa Parks
title music is available when viewing slides. If music is playing
correctly then you may choose not to display the error message in
the future by checking the appropriate box when the error message
is displayed.
Multicom Publishing Inc.
1100 Olive Way Suite 1250
Seattle, WA 98101
(206) 622-5530 - voice [Steve Dixon, Tech support]
(206) 622-4380 - FAX
From: Pep's Data System (205) 626-7447